product name:block adhesive magnet
model no.:N35
size:10x5x1
application:industrial/packing/daily use
shape:block
type:permanent
composite:Nd/Fe/B
brand name:Honfon


3M
Adhesive Transfer Tapes
with Adhesive 200
467 • 468 • 9567 • 9568
Product Description :
3M™ Adhesive Transfer Tapes with 3M™ Adhesive 200 are the industry choice for metal nameplates for the industrial or electronic applications because of excellent quality, consistency and durability. In addition, as a result of 3M's innovative, proprietary process, Adhesive 200 also offers the following performance characteristics:
• Excellent high temperature performance as well as excellent shear strength (that minimizes edge lifting and slippage of parts).
• Excellent resistance to harsh environments; this adhesive can withstand splashes of organic solvents, weak acids and bases and salt water. In addition, it performs well after exposures to humidity and hot/cold cycles.
• Outstanding peel adhesion values are outstanding on metals and HSE plastics.
Peel adhesion increases with increased adhesive thickness.

Available Sizes:


Application Techniques:
For maximum bond strength (during installation of the final part) the surface should be thoroughly cleaned and dried. Typical cleaning solvents are heptane (for oily surfaces) or isopropyl alcohol for plastics.Use reagent grade solvents since common household materials like rubbing alcohol frequently contain oils to minimize the drying affect on skin. These oils can interfere with the performance of a pressure-sensitive adhesive.Consult solvent manufacturers MSDS for proper handling and storage instructions. Also, use disposable wipes, that do not contain oils, to remove the cleaning solvents.

It is necessary to provide pressure during lamination (1.5-20 pli recommended) and during final part installation (10-15 psi) to allow the adhesive to come into direct contact with the substrate. Using a hard edged plastic tool, which is the full width of the laminated part, helps to provide the necessary pressure at the point of lamination.
Heat can increase bond strength when bonding to metal parts (generally this same increase is observed at room temperature over longer times, weeks). For plastic parts, the bond strength is not enhanced with the addition of heat.
The ideal adhesive application temperature range is 70°F (21°C) to 100°F (38°C). Application is not recommended if the surface temperature is below 50°F (10°C) because the adhesive becomes too firm to adhere readily. Once properly applied, at the recommended application temperature, low temperature holding is generally satisfactory (please refer to section VII of the Typical Physical Properties and Performance Characteristics).

When bonding a thin, smooth, flexible material to a smooth surface, it is generally acceptable to use 2 mils of adhesive. If a texture is visible on one or both surfaces, the 5 mil adhesive would be suggested. If both materials are rigid, it may be necessary to use a thicker adhesive to successfully bond the components. 3M™ VHB™ Acrylic Foam Tapes may be required (please refer to the data page 70-0709-3863-7).

block self adhesive magnet